Exterior Mineralwash How To Video

Velatura Mineralwash is an authentic mineral-based paint to create mottling or subtle movement effects for a limewash look on Interior drywall in two easy steps with no additional primer. An artistic applicator can paint soft tonal color variations in a brush-applied crosshatch technique for the 1st coat and can use varied techniques with a brush, cloth, or rag for the 2nd coat.

Recommended in bedrooms, living rooms, and other common areas (Not recommended for high-traffic)  
Toxin-free, Zero-VOC, and environmentally friendly  
Brush-applied in two easy steps with no primer
Multiple applicators can work the same wall and achieve similar effects 

SURFACE TYPES

Interior pre-painted or unpainted Gypsum Board (Drywall)

COVERAGE

1 Coat	1L/1QT	2.5L/0.67GAL
Square Feet	100-140	250-350

APPLICATION REQUIREMENTS

• PREP Make sure the surface is clean and ready to be painted. 
• 1st COAT: Apply undiluted or add up to 5% water in a crosshatch technique to fully cover the wall. Let dry to touch before next coat. 
• 2nd COAT: Must dilute 50%-80% with water and then paint in crosshatch technique and use cloth technique if needed. 
• TOOLS Apply with a brush for 1st Coat and brush and/or cloth for 2nd coat. 
• DRY TIME 4-6 Hours
• TOUCH UPS Very flat finish. 

RECOMMENDED DILUTION

2nd Coat ONLY	1L/1QT	2.5L/0.67GAL
50%	500ml	1.25L
80%	800ml	2L